45" High Sides – Standard Height
Specifications
RANCO ED26-34 Anvil Demolition End Dump
34' Overall Length
32' Useable Tub Length
26 Cubic Yards
HYDRAULICS & DRAFT ARMS
Outboard Cylinder (No Doghouse)
Inverted Hydraulic Cylinder
46° Dump Angle with All Axles on the Ground
BODY
AR400 Steel Construction
¼" Tub Forward Sections
5/16" Last Section
54" Side Height
"Z" Brace Seam Strengthener
(3) Tapered Bolsters
Oscillating Kingpin
15' Draft Arms
4" Heavy Duty Rubber Bushed Hinges
TAILGATE
Highlift Tailgate
76" Ground Clearance
Single Brace Tailgate
50,000# Tailgate
4" x 26" Gate Cylinders
Gate Cylinders Guards
4" x 8" Gate Lock
UNDERCARRIAGE
Hutch H-903 Suspension
Tandem 22,500# Axles - 102" Wide
Maxi-Cans Mounted on top of the Axles
Outboard Hubs / 16½" x 7" Brakes
Frameless End Dump
4-On-The-Floor Dumping (Both Axles Stay on the Ground)
Continental HSR 11R24.5 Tires on 10-Hole Steel Disc Wheels
OTHER
Bolt-On Front & Rear Fenders
Telescopic Drop Legs
Ladder Mounted on Forward Bulkhead
LED Lights
Back-up Alarm
Sand Blast, Print and Paint
Feature/Benefits
FEATURE, BENEFITS AND COMPARISIONS- The Anvil’s constant radius half-round shape.
- The Anvil’s body is fabricated from AR400 abrasion resisting heat treated alloy steel.
- The thickness of Anvil’s body shell increases at the rear of the body.
- Body seams are reinforced with a continuous welded “Z” brace.
- The self shedding angled top rail design.
- A radius flanged front bulkhead.
- Anvil’s thick walled, closed boxed structural sections.
- The Anvil has a vertical, rear body cut off and rear bolster.
- All bolsters are tapered inward at the bottom.
- The suspension sub-frame includes a front bolster in addition to the rear bolster.
- Inverted, trunnion style, hydraulic dump cylinder.
- The Anvil end dump is designed to dump entirely by rotating around the single point tandem suspension trunnion.
- The Anvil has a fully adjustable, over-center locking gate latch powered by a double acting 4" diameter air cylinder.
- Rugged high lift tailgate and hinge design.
- Mud flaps are hinged and mounted to the tailgate with heavy duty brackets.
- The Anvil uses wide trac axles.
- The Anvil is equipped with bolt-on front and rear fenders.